Току-що обявих новия курс Learn Spring Security, включително пълния материал, фокусиран върху новия стек OAuth2 в Spring Security 5:
>> ПРЕГЛЕД НА ОСТАНАЛИТЕ НА КУРСА ГореТоку що обявих новия курс Learn Spring , фокусиран върху основите на Spring 5 и Spring Boot 2:
>> ПРЕГЛЕД НА КУРСА1. Общ преглед
В днешно време предните и задните компоненти често разделят уеб приложение. Обикновено ние излагаме API като back-end компонент за интеграция на front-end компонент или приложения на трети страни.
При такъв сценарий е от съществено значение да има подходящи спецификации за приложните програмни интерфейси (API). В същото време документацията за API трябва да бъде информативна, четлива и лесна за следване.
Освен това референтната документация трябва едновременно да описва всяка промяна в API. Постигането на това ръчно е досадно упражнение, така че автоматизирането на процеса беше неизбежно.
В този урок ще разгледаме Swagger 2 за уеб услуга Spring REST , използвайки внедряването на Springfox на спецификацията Swagger 2.
Ако не сте запознати със Swagger, посетете уеб страницата му, за да научите повече, преди да продължите с този урок.
2. Целеви проект
Създаването на услугата REST, която ще използваме, не е в обхвата на тази статия. Ако вече имате подходящ проект, използвайте го. Ако не, тези връзки са добро място за начало:
- Изградете REST API със статия Spring 4 и Java Config
- Изграждане на RESTful уеб услуга
3. Добавяне на зависимостта на Maven
Както бе споменато по-горе, ще използваме внедряването на Springfox на спецификацията Swagger. Най-новата версия може да бъде намерена на Maven Central.
За да го добавим към нашия проект Maven, се нуждаем от зависимост във файла pom.xml :
io.springfox springfox-swagger2 2.9.2 3.1. Зависимост на пролетното зареждане
За проектите, базирани на Spring Boot, е достатъчно да добавите единична зависимост springfox-boot-starter :
io.springfox springfox-boot-starter 3.0.0 4. Интегриране на Swagger 2 в проекта
4.1. Конфигурация на Java
Конфигурацията на Swagger се концентрира главно около Docket Bean:
@Configuration public class SpringFoxConfig { @Bean public Docket api() { return new Docket(DocumentationType.SWAGGER_2) .select() .apis(RequestHandlerSelectors.any()) .paths(PathSelectors.any()) .build(); } }След дефиниране на Docket bean, неговият метод select () връща екземпляр на ApiSelectorBuilder , който предоставя начин за управление на крайните точки, изложени от Swagger.
Можем да конфигурираме предикати за избор на RequestHandler s с помощта на RequestHandlerSelectors и PathSelectors . Използването на any () и за двете ще направи достъпна документацията за целия ни API чрез Swagger.
4.2. Конфигурация без пролетно зареждане
В обикновени пролетни проекти трябва да активираме Swagger 2 изрично. За целта трябва да използваме @ EnableSwagger2WebMvc в нашия конфигурационен клас :
@Configuration @EnableSwagger2WebMvc public class SpringFoxConfig { }Освен това, без Spring Boot, нямаме лукса да се конфигурира автоматично от нашите обработчици на ресурси.
Swagger UI добавя набор от ресурси, които трябва да конфигурираме като част от клас, който разширява WebMvcConfigurerAdapter и е анотиран с @EnableWebMvc:
@Override public void addResourceHandlers(ResourceHandlerRegistry registry) { registry.addResourceHandler("swagger-ui.html") .addResourceLocations("classpath:/META-INF/resources/"); registry.addResourceHandler("/webjars/**") .addResourceLocations("classpath:/META-INF/resources/webjars/"); }4.3. Verification
To verify that Springfox is working, we can visit this URL in our browser:
//localhost:8080/spring-security-rest/api/v2/api-docs
The result is a JSON response with a large number of key-value pairs, which is not very human readable. Fortunately, Swagger provides Swagger UI for this purpose.
5. Swagger UI
Swagger UI is a built-in solution that makes user interaction with the Swagger-generated API documentation much easier.
5.1. Enabling Springfox's Swagger UI
To use Swagger UI, we need to add an additional Maven dependency:
io.springfox springfox-swagger-ui 2.9.2 Now we can test it in our browser by visiting:
//localhost:8080/your-app-root/swagger-ui/
In our case, by the way, the exact URL will be:
//localhost:8080/spring-security-rest/api/swagger-ui/
The result should look something like this:
5.2. Exploring Swagger Documentation
Within Swagger’s response is a list of all controllers defined in our application. Clicking on any of them will list the valid HTTP methods (DELETE, GET, HEAD, OPTIONS, PATCH, POST, PUT).
Expanding each method provides additional useful data, such as response status, content-type, and a list of parameters. It is also possible to try each method using the UI.
Swagger’s ability to be synchronized with our code base is crucial. To demonstrate this, we can add a new controller to our application:
@RestController public class CustomController { @RequestMapping(value = "/custom", method = RequestMethod.POST) public String custom() { return "custom"; } }Now if we refresh the Swagger documentation, we see custom-controller in the list of controllers. As we know, there is only one method (POST) shown in Swagger’s response.
6. Spring Data REST
Springfox provides support for Spring Data REST through its springfox-data-rest library.
Spring Boot will take care of the auto-configuration if it discovers the spring-boot-starter-data-rest on the classpath.
Now let's create an entity named User:
@Entity public class User { @Id private Long id; private String firstName; private int age; private String email; // getters and setters }Then we'll create the UserRepository to add CRUD operations on the User entity:
@Repository public interface UserRepository extends CrudRepository { }Last, we'll import the SpringDataRestConfiguration class to the SpringFoxConfig class:
@EnableSwagger2WebMvc @Import(SpringDataRestConfiguration.class) public class SpringFoxConfig { //... }Note: We've used the @EnableSwagger2WebMvc annotation to enable Swagger, as it has replaced the @EnableSwagger2 annotation in version 3 of the libraries.
Let's restart the application to generate the specifications for the Spring Data REST APIs:
We can see that Springfox has generated the specifications for the User entity with HTTP methods like GET, POST, PUT, PATCH, and DELETE.
7. Bean Validations
Springfox also supports the bean validation annotations through its springfox-bean-validators library.
First, we'll add the Maven dependency to our pom.xml:
io.springfox springfox-bean-validators 2.9.2 Again, if we use Spring Boot, we don't have to provide the above dependency explicitly.
Next, let's add a few validation annotations like @NotNull and @Min to the User entity:
@Entity public class User { //... @NotNull(message = "First Name cannot be null") private String firstName; @Min(value = 15, message = "Age should not be less than 15") @Max(value = 65, message = "Age should not be greater than 65") private int age; }Finally, we'll import the BeanValidatorPluginsConfiguration class to the SpringFoxConfig class:
@EnableSwagger2 @Import(BeanValidatorPluginsConfiguration.class) public class SpringFoxConfig { //... }Let's take a look at the changes in the API specifications:
Here, we can observe that the User model has * required on the firstName. Also, the minimum and maximum values are defined for the age.
8. Plugin
In order to add specific features to the API specifications, we can create a Springfox plugin. A plugin can offer various features, from enriching the models and properties to the custom API listings and defaults.
Springfox supports the plugin creation through its spi module. The spi module provides a few interfaces like the ModelBuilderPlugin, ModelPropertyBuilderPlugin, and ApiListingBuilderPlugin that act as an extensibility hook to implement a custom plugin.
To demonstrate the capabilities, let's create a plugin to enrich the email property of the User model. We'll use the ModelPropertyBuilderPlugin interface and set the values of the pattern and example.
First, let's create the EmailAnnotationPlugin class and override the supports method to allow any documentation type, such as Swagger 1.2 and Swagger 2:
@Component @Order(Validators.BEAN_VALIDATOR_PLUGIN_ORDER) public class EmailAnnotationPlugin implements ModelPropertyBuilderPlugin { @Override public boolean supports(DocumentationType delimiter) { return true; } }Then we'll override the apply method of the ModelPropertyBuilderPlugin to set the values of the builder properties:
@Override public void apply(ModelPropertyContext context) { Optional email = annotationFromBean(context, Email.class); if (email.isPresent()) { context.getSpecificationBuilder().facetBuilder(StringElementFacetBuilder.class) .pattern(email.get().regexp()); context.getSpecificationBuilder().example("[email protected]"); } }So, the API specifications will show the pattern and example values of the property annotated with the @Email annotation.
Next, we'll add the @Email annotation to the User entity:
@Entity public class User { //... @Email(regexp=".*@.*\\..*", message = "Email should be valid") private String email; }Last, we'll enable the EmailAnnotationPlugin in the SpringFoxConfig class by registering as a bean:
@Import({BeanValidatorPluginsConfiguration.class}) public class SpringFoxConfig { //... @Bean public EmailAnnotationPlugin emailPlugin() { return new EmailAnnotationPlugin(); } }Let's check out the EmailAnnotationPlugin in action:
We can see the value of the pattern is the same regex (.*@.*\\..*) from the email property of the User entity.
Similarly, the value of the example ([email protected]) is the same, as defined in the apply method of the EmailAnnotationPlugin.
9. Advanced Configuration
The Docket bean of our application can be configured to give us more control over the API documentation generation process.
9.1. Filtering API for Swagger’s Response
It is not always desirable to expose the documentation for the entire API. We can restrict Swagger’s response by passing parameters to the apis() and paths() methods of the Docket class.
As seen above, RequestHandlerSelectors allows using the any or none predicates but can also be used to filter the API according to the base package, class annotation, and method annotations.
PathSelectors provides additional filtering with predicates, which scan the request paths of our application. We can use any(), none(), regex(), or ant().
In the example below, we will instruct Swagger to include only controllers from a particular package, with specific paths, using the ant() predicate:
@Bean public Docket api() { return new Docket(DocumentationType.SWAGGER_2) .select() .apis(RequestHandlerSelectors.basePackage("com.baeldung.web.controller")) .paths(PathSelectors.ant("/foos/*")) .build(); }9.2. Custom Information
Swagger also provides some default values in its response, which we can customize, such as “Api Documentation”, “Created by Contact Email”, and “Apache 2.0”.
To change these values, we can use the apiInfo(ApiInfo apiInfo) method — the ApiInfo class that contains custom information about the API:
@Bean public Docket api() { return new Docket(DocumentationType.SWAGGER_2) .select() .apis(RequestHandlerSelectors.basePackage("com.example.controller")) .paths(PathSelectors.ant("/foos/*")) .build() .apiInfo(apiInfo()); } private ApiInfo apiInfo() { return new ApiInfo( "My REST API", "Some custom description of API.", "API TOS", "Terms of service", new Contact("John Doe", "www.example.com", "[email protected]"), "License of API", "API license URL", Collections.emptyList()); }9.3. Custom Methods Response Messages
Swagger allows globally overriding response messages of HTTP methods through Docket’s globalResponseMessage()method.
First, we need to instruct Swagger not to use default response messages. Suppose we want to override 500 and 403 response messages for all GET methods.
To achieve this, some code must be added to the Docket’s initialization block (original code is excluded for clarity):
.useDefaultResponseMessages(false) .globalResponseMessage(RequestMethod.GET, newArrayList(new ResponseMessageBuilder() .code(500) .message("500 message") .responseModel(new ModelRef("Error")) .build(), new ResponseMessageBuilder() .code(403) .message("Forbidden!") .build()));
10. Swagger UI With an OAuth-Secured API
The Swagger UI provides a number of very useful features that we've covered well so far here. But we can't really use most of these if our API is secured and not accessible.
Let's see how we can allow Swagger to access an OAuth-secured API using the Authorization Code grant type in this example.
We'll configure Swagger to access our secured API using the SecurityScheme and SecurityContext support:
@Bean public Docket api() { return new Docket(DocumentationType.SWAGGER_2).select() .apis(RequestHandlerSelectors.any()) .paths(PathSelectors.any()) .build() .securitySchemes(Arrays.asList(securityScheme())) .securityContexts(Arrays.asList(securityContext())); }10.1. The Security Configuration
We'll define a SecurityConfiguration bean in our Swagger configuration and set some defaults:
@Bean public SecurityConfiguration security() { return SecurityConfigurationBuilder.builder() .clientId(CLIENT_ID) .clientSecret(CLIENT_SECRET) .scopeSeparator(" ") .useBasicAuthenticationWithAccessCodeGrant(true) .build(); }10.2. SecurityScheme
Next, we'll define our SecurityScheme; this is used to describe how our API is secured (Basic Authentication, OAuth2, …).
In our case here, we'll define an OAuth scheme used to secure our Resource Server:
private SecurityScheme securityScheme() { GrantType grantType = new AuthorizationCodeGrantBuilder() .tokenEndpoint(new TokenEndpoint(AUTH_SERVER + "/token", "oauthtoken")) .tokenRequestEndpoint( new TokenRequestEndpoint(AUTH_SERVER + "/authorize", CLIENT_ID, CLIENT_SECRET)) .build(); SecurityScheme oauth = new OAuthBuilder().name("spring_oauth") .grantTypes(Arrays.asList(grantType)) .scopes(Arrays.asList(scopes())) .build(); return oauth; }Note that we used the Authorization Code grant type, for which we need to provide a token endpoint and the authorization URL of our OAuth2 Authorization Server.
And here are the scopes we need to have defined:
private AuthorizationScope[] scopes() { AuthorizationScope[] scopes = { new AuthorizationScope("read", "for read operations"), new AuthorizationScope("write", "for write operations"), new AuthorizationScope("foo", "Access foo API") }; return scopes; }These sync up with the scopes we actually have defined in our application, for the /foos API.
10.3. SecurityContext
Finally, we need to define a SecurityContext for our example API:
private SecurityContext securityContext() { return SecurityContext.builder() .securityReferences( Arrays.asList(new SecurityReference("spring_oauth", scopes()))) .forPaths(PathSelectors.regex("/foos.*")) .build(); }Note how the name we used here in the reference — spring_oauth — syncs up with the name we used previously in the SecurityScheme.
10.4. Test
Now that we have everything set up and ready to go, let's take a look at our Swagger UI and try access the Foo API.
We can access the Swagger UI locally:
//localhost:8082/spring-security-oauth-resource/swagger-ui.htmlAs we can see, a new Authorize button now exists due to our security configurations:
When we click the Authorize button, we can see the following pop-up to authorize our Swagger UI to access the secured API:
Note that:
- We can already see the CLIENT_ID and CLIENT_SECRET, as we've pre-configured them earlier (but we can still change them).
- We can now select the scopes we need.
Here's how the secured API is marked:
And now, finally, we can hit our API!
Разбира се, почти се разбира, че трябва да внимаваме как излагаме външния потребителски интерфейс на Swagger, сега, когато тази конфигурация на защитата е активна.
11. Заключение
В тази статия настроихме Swagger 2, за да генерираме документация за Spring REST API. Също така проучихме начини за визуализиране и персонализиране на изхода на Swagger. И накрая, разгледахме проста конфигурация на OAuth за Swagger.
Най- пълното прилагане на този урок може да се намери в проекта GitHub. За да видите настройката в стартиращ проект, разгледайте този модул GitHub.
За раздела OAuth кодът е достъпен в нашето хранилище spring-security-oauth.
И ако сте ученик на REST With Spring, преминете към Урок 1 от Модул 7, за да се задълбочите в настройването на Swagger с Spring и Spring Boot.
Сигурност отдолу